计算机科学 ›› 2018, Vol. 45 ›› Issue (9): 94-98.doi: 10.11896/j.issn.1002-137X.2018.09.014

• 第十六届全国软件与应用学术会议 • 上一篇    下一篇

面向机载设备自动化测试的信号模型

胡京徽, 吴际, 孟翰, 刘超, 杨海燕   

  1. 北京航空航天大学计算机学院 北京100191
  • 收稿日期:2017-12-05 出版日期:2018-09-20 发布日期:2018-10-10
  • 通讯作者: 吴 际(1974-),男,博士,副教授,主要研究领域为软件安全性与可靠性等,E-mail:wuji@buaa.edu.cn
  • 作者简介:胡京徽(1992-),男,硕士,主要研究领域为软件需求、模型驱动软件工程;孟 翰(1993-),男,硕士,主要研究领域为软件需求建模等;刘 超(1958-),男,博士,教授,主要研究领域为软件测试等;杨海燕(1974-),女,讲师,主要研究领域为软件工程。
  • 基金资助:
    本文受科工局技术基础项目(JSZL2014601B008)资助。

Signal Model of Automatic Testing Technology for Airborne Equipment

HU Jing-hui, WU Ji, MENG Han, LIU Chao, YANG Hai-yan   

  1. School of Computer Science and Engineering,Beihang University,Beijing 100191,China
  • Received:2017-12-05 Online:2018-09-20 Published:2018-10-10

摘要: 在机载设备测试中,各种测试信号的准确定义和检测是保证飞行安全的关键因素。文中提出一种面向自动测试机载设备测试需求描述的信号模型,通过对机载设备测试需求中所涉及到的信号进行分类,以及将测试设备和被测设备之间传送的信号视作带有一组参数的动作,建立适用于自动测试机载设备需求描述的信号模型,旨在解决目前工业界中机载设备自动化测试需求中的信号规范描述问题。最后通过典型案例说明了该信号模型的特点和可行性。

关键词: 机载设备测试, 信号模型, 自动测试设备

Abstract: In the airborne equipment testing,exact definition and detection of various test signals is a key factor to ensure safety flight.This paper presented a signal model for the test requirements description of automatic test airborne equipment.In the research,the signals involved in the test requirements of the airborne equipment were categorized,the signals transmitted between the test equipment and the equipment under test were regarded as a set of action including parameters,and a signal model for automatic test airborne equipment requirements was established.The model aims to address the problem of the signal specification description in the airborne equipment automatic test equipment area of current industry.This paper illustrated the characteristics and feasibility of the signal model through a typical case study.

Key words: Airborne equipment testing, Automatic test equipment, Signal model

中图分类号: 

  • TP311.5
[1]BOGLIETTI A,CAVAGNINO A,TENCONI S,et al.The Safety Critical Electric Machines and Drives in the more Electric Aircraft:A Survey [C]∥IEEE Industrial Electronics 2009.Italy,2009:2587-2594.
[2]DU X,TANG D Q,YANG Y C.Development of the Automatic Testing and Fault Diagnosis Technology for Airborne Equipment[J].Computer Measurement and Control,2003,11(1):5-8.
[3]XIN D B,AI B.Research on Airborne RS422 Bus Acquisition
Technology [J].China Science and Technology Information,2016,28(21):73-74.
[4]LI R,LIU W G,LIU X J.Design and Implementation of a ARINC429
Bus Transmit-receive System [J].Computer Measurement and Control,2005,13(9):970-972.
[5]ZHAO Y,TANG Y Q,CHEN P,et al.Application of 1553B Bus to the Aircraft Equipment Testing Systems [J].Journal of Liao-ning Institute of Technology,2002,22(4):19-20.
[6]ROSS W A.The Impact of Next Generation Test Technology on Aviation Maintenance [C]∥IEEE Systems Readiness Technology Conference(AUTOTESTCON 2003).USA,2003:2-9.
[7]DO 160:Environmental Conditions and Test Procedures for Airborne Equipment [M].Americal:Radio Technical Commission for Aeronautics,2010.
[8]NEBUT C,FLEUREY F,LE TRAON Y,et al.Automatic Test Generation:A Use Case Driven Approach[J].IEEE Transactions on Software Engineering,2006,32(3):140-155.
[9]BRINDLEY,KEITH.Automatic Test Equipment [M].American Michigan:Newnes,2013:1-2.
[10]SUGDEN R.Why be Consistent? A Critical Analysis of Consistency Requirements in Choice Theory [J].Economica,1985,52(206):167-183.
[11]HAUBECK C,LAMERSDORF W,LADIGES J.Interaction of Model-driven Engineering and Signal-based Online Monitoring of Production System:Towards Requirement-aware Evolution [C]∥Industrial Electronics Society,IECON 2014-40th Annual Conference of the IEEE.2014:2571-2577.
[12]GAO S W,LV J H,WUNIRI Q,et al.Spacecraft Test Requirement Description and Automatic Generation Method [J].Journal of Beijing University of Aeronautics and Astronautics,2015,41(7):1275-1286.(in Chinese)
高世伟,吕江花,乌尼日其其格,等.航天器测试需求描述及其自动生成[J].北京航空航天大学学报,2015,41(7):1275-1286.
[13]CHO K,LEE W,KIM J.Reducing the Failure Bitmap Size with a Partial Solution Search Tree for the Low Cost Automatic Test Equipment [C]∥SoC Design Conference.2014:128-129.
[14]RADU M.Testing Digital Circuits Using a Mixed-Signal Automatic Test Equipment [C]∥IEEE International Conference on Automation,Quality and Testing.2014.
[15]SUN L,YANG H Y,WU J.Simulation and Real-time Analysis for Embedded Software Design Model with Consideration of Integrated Modular Avionics Platform[J].Computer Science,2015,38(12):95-97.(in Chinese)
孙磊,杨海燕,吴际.基于IMA平台的嵌入式软件设计模型仿真及实时性分析方法[J].计算机科学,2015,38(12):95-97.
[16]YUE T,BRIAND L C,LABICHE Y.Automatically Deriving a UML Analysis Model from a Use Case Model [M].Candan Ottwa:Carleton University Publisher,2010.
[17]ZHANG G,YUE T,WU J,et al.Zen-RUCM:A Tool for Supporting a Comprehensive and Extensible Use Case Modeling Framework [C]∥ACM/IEEE 16th International Conference on Model Driven Engineering Languages and Systems,Tools De-monstration.2013.
[1] 孟翰, 吴际, 胡京徽, 刘超, 杨海燕, 孙新颖.
硬件系统自动化测试的多视角建模及案例研究
Modeling in Multiple Views and Industrial Case Study of Automatic Test for Hardware System
计算机科学, 2018, 45(9): 75-80. https://doi.org/10.11896/j.issn.1002-137X.2018.09.011
[2] 石伟文, 王学奇, 范凯胤, 王明君.
结合多信号模型与遗传算法的板级电路测点选取方法
Measuring Point Selection Method of Board-level Circuit Based on Multi-signal Model and Genetic Algorithm
计算机科学, 2018, 45(8): 295-299. https://doi.org/10.11896/j.issn.1002-137X.2018.08.053
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!