计算机科学 ›› 2012, Vol. 39 ›› Issue (Z11): 344-348.
• 人工智能 • 上一篇 下一篇
胡 鸣，刘 贝
出版日期:
发布日期:
Online:
Published:
摘要： 给出一个基于多模块的可配置磁盘阵列存储系统的框架设计与编程实现，软件支持RAID0, RAID1,RAID3 , RAID5 , RAID6等主流阵列级别，另外还添加了RAID5x阵列。采用多线程技术，能较真实地模拟客户与存储系统的动态交互过程，能根据用户的配置进行阵列正常、降级的读写性能测试。经实验验证，该软件能对阵列存储系 统进行较为真实的模拟，进一步优化后，其可以作为磁盘阵列的性能、可靠性以及阵列优化方法的一个模拟研究平台。
关键词: 磁盘阵列，多模块，可配置，模拟
Abstract: Given a simulation of configurable disk arrays storage system based on multi-module. This software supports RAIDO,RAIDl,RAID3,RAID5,RAID6,and adds the RAID5x This software adopts multi-thread technology to simulate the dynamic interaction of the client and storage system. According to user configuration, this software can test the read and write performance of array on normal or degraded status. By experimental tests,the software can be a more realistic simulation of the array storage system. After further optimization, this software will be able to a simulated research platform of disk array performance, reliability, and optimization method.
Key words: Disk array, Multi-module, Configurable, Simulation
胡 鸣，刘 贝. 基于多模块的可配置阵列存储系统的模拟实现[J]. 计算机科学, 2012, 39(Z11): 344-348. https://doi.org/
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: https://www.jsjkx.com/CN/
https://www.jsjkx.com/CN/Y2012/V39/IZ11/344
Cited
首页