基于GPRS的无线数据收发终端设计与实现

计算机科学 ›› 2012, Vol. 39 ›› Issue (Z11): 72-75.

基于GPRS的无线数据收发终端设计与实现

马礼王春磊薛粉叶吴辉

(北方工业大学信息工程学院北京 100144)

出版日期:2018-11-16 发布日期:2018-11-16

Designing and Implementation of Wireless Data Transceiver Terminal Based on GPRS

Online:2018-11-16 Published:2018-11-16

摘要/Abstract

摘要： 针对环境监测中远程采集数据的实时传输、远程控制以及对监测数据进行分析的问题，研究了ZigBcc协议和射频通信原理，通过GPRS实现了远程监控数据的实时传输。将基于ARM的S3C2440芯片作为核心设计的硬件电路，在嵌入式Linux环境下进行终端应用程序的设计，在VS2005下进行上位机软件的开发。通过MC35i模块实现了C}PRS网络和Internet监控中心的通信，为环境监测工作提供了良好的平台。

关键词: ZigI3ee协议，射频通信，GPRS，嵌入式

Abstract: Aiming at the problem of environmental monitoring in real-time remote data collection, transmission, remote control and analysis, the Zigl3ee protocol and RF communication on principle are discussed. Through GPRS technology, the remote monitoring of real-time wireless data transmission is achieved. Based on the ARM chip S3C2440 as the core the hardware circuits are designed, in the embedded Linux developed monitor application and the PC software in the VS2005 development. Through MC35i module, communication of GPRS network and Internet monitoring center is a- chieved, so as to provide a good platform for the overall monitoring of the urban environment.

Key words: ZigBee protocol, RF communication, GPRS, Embedded

马礼王春磊薛粉叶吴辉. 基于GPRS的无线数据收发终端设计与实现[J]. 计算机科学, 2012, 39(Z11): 72-75. https://doi.org/

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed