基于通用物料清单的PDM与ERP集成

计算机科学 ›› 2013, Vol. 40 ›› Issue (Z11): 401-404.

基于通用物料清单的PDM与ERP集成

朱超,杨文兵,孙临瑞,王会龙,黄关华

绍兴文理学院元培学院经济与管理系绍兴312000;绍兴文理学院元培学院经济与管理系绍兴312000;南京中航特装上海技术中心上海200000;绍兴文理学院元培学院经济与管理系绍兴312000;绍兴文理学院元培学院经济与管理系绍兴312000

出版日期:2018-11-16 发布日期:2018-11-16
基金资助:
本文受绍兴文理学院校级重点课题(2012SK1017)资助

Integration of PDM and ERP Based on the Generic Bill of Materials

ZHU Chao,YANG Wen-bing,SUN Lin-rui,WANG Hui-long and HUANG Guan-hua

Online:2018-11-16 Published:2018-11-16

摘要/Abstract

摘要： 产品数据管理(PDM)和企业资源计划(ERP)是制造业实现计算机集成制造系统的重要技术支撑,现有的系统集成主要基于工作流和产品物料清单(BOM)。前者受工作流节点的限制无法实现数据的实时更新,后者仅集成产品结构数据,无法满足基于多样化顾客需求的变型设计模式。基于通用物料清单(GBOM)创建包含产品配置信息的完整产品结构,通过建立产品零部件(Item)和GBOM的中间文件完成PDM和ERP系统间的数据交换,实现系统集成。GBOM中的配置信息传递到ERP端,生产人员可根据顾客需求在ERP端进行产品配置,缩短产品的市场反应时间。集成方法在RMM3塑料外壳式断路器中的应用证明了方法的有效性。

关键词: 通用物料清单,产品数据管理,企业资源计划,系统集成

Abstract: Product Data Management (PDM) and Enterprise Resources Planning (ERP) are the important technical foundations of manufacturing to achieve Computer Integrated Manufacturing System．The integration of the two systems is mainly based on the work flow and bill of materials (BOM)．The former cannot update data real-time because of the restriction of work flow nodes；the latter integrated product structure data only which cannot meet the needs of variant design method based on the diversiform customer requirements．The complete product structure which includes the product configuration information was established based on the generic bill of materials (GBOM)．To accomplish the integration of PDM and ERP,the intermediate files of part (Item) and GBOM were set up for data interchange．The configuration information in the GBOM was transport to the ERP end,at which the production staff can configure product,the response time to market changes was shortened．A case study on RMM3molded case circuit breaker (MCCB) illustrated the effectiveness of the proposed integration method．

Key words: Generic bill of materials,Product data management,Enterprise resource planning,System integration

朱超,杨文兵,孙临瑞,王会龙,黄关华. 基于通用物料清单的PDM与ERP集成[J]. 计算机科学, 2013, 40(Z11): 401-404. https://doi.org/

ZHU Chao,YANG Wen-bing,SUN Lin-rui,WANG Hui-long and HUANG Guan-hua. Integration of PDM and ERP Based on the Generic Bill of Materials[J]. Computer Science, 2013, 40(Z11): 401-404. https://doi.org/

参考文献

[1] 唐卓,刘国华,李肯立．多域环境下工作流访问控制时序策略组合研究[J].计算机科学,2011,38(1):125-129
[2] 杨田田,李世其．以工作流驱动的PDM与ERP集成方法研究[J].计算机集成制造系统,2005,11(11):1715-1575
[3] 徐雁,陈新度,陈新．PDM与ERP系统集成的关键技术与应用[J]．中国机械工程,2007,18(3):296-299
[4] Miller E．Integrating PDM and ERP[J]．Computer-Aided Engineering,1999,3:69-78
[5] Kai A O,Per S,Ers T．A procedure-oriented generic bill of materials[J]．Computer Industry Engineering,1997,32(1):29-45
[6] 吴先超,吕晓枫,孙吉贵.基于广义产品结构的配置和集成研究[J].计算机集成制造系统,2006,12(6):869-875
[7] 高健鹰,褚学宁,严隽琪.基于通用物料清单的配置设计方法研究与实现[J].计算机集成制造系统,2007,13(3):417-424
[8] 崔贵丹,王德权.某制造企业PDM管理信息系统的设计与应用[J].制造业自动化,2013,35(2):12-14
[9] 席朝.PDM与ERP系统集成的实践与经验[J].山西电子技术,2012(4):15-16
[10] 单汨源,兰海丰,毛超.基于GBOM的供应链合作伙伴选择[J].统计与决策,2011(12):45-48

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed