计算机科学 ›› 2016, Vol. 43 ›› Issue (Z11): 362-367.doi: 10.11896/j.issn.1002-137X.2016.11A.084

• 信息安全 • 上一篇    下一篇

结合OWA算子和模糊DEMATEL的风险评估方法

林晓华,贾文华   

  1. 南京工程学院机械工程学院 南京211167,南京工程学院机械工程学院 南京211167
  • 出版日期:2018-12-01 发布日期:2018-12-01
  • 基金资助:
    本文受国家自然科学基金(51505211),江苏省自然科学青年基金(BK20130741),南京工程学院引进人才科研启动基金(YKJ201301)资助

FMEA Method Combining OWA Operator and Fuzzy DEMATEL

LIN Xiao-hua and JIA Wen-hua   

  • Online:2018-12-01 Published:2018-12-01

摘要: 针对传统故障模式与影响分析(FMEA)方法在实际应用中的不足,提出一种基于有序加权平均(OWA)算子和决策试行与评价实验法(DEMATEL)的风险排序方法。FMEA专家对故障模式的3个风险因子给出模糊评价信息,应用OWA算子对评估信息进行集结,得到各故障原因对故障模式的影响强度。采用模糊DEMATEL法构建FMEA系统要素间的初始直接影响矩阵,经过运算可得综合影响矩阵,并计算各故障原因的原因度,据此进行产品或系统的失效风险评估。运用该方法对地铁车门系统的基础部件进行安全性分析,并将所得结果与传统RPN方法的结果做对比,验证了该方法的可行性和有效性。

关键词: 故障模式与影响分析(FMEA),风险评估,模糊数,OWA算子,DEMATEL法

Abstract: Considering the shortcomings of traditional failure mode and effect analysis(FMEA) method in practical application,a risk ranking method was proposed based on ordered weighted averaging(OWA) operator and decision ma-king trial and evaluation method(DEMATEL).FMEA experts make fuzzy evaluation on the three risk factors of the fai-lure modes,and the evaluation information is aggregated by OWA operator to get the influence degree of the failure cause to failure mode.The initial direct-relation fuzzy matrix of the FMEA system is constructed by using fuzzy DEMATEL method,then the total-relation fuzzy matrix is calculated,and the reason degree of each failure cause is computed,based on which the product or system risk assessment is conducted.The proposed method is applied to safety analysis of the basic components of the metro car door system,and the feasibility and effectiveness of the method is verified by comparing with the results of the traditional RPN method.

Key words: Failure mode and effect analysis(FMEA),Risk assessment,Fuzzy number,OWA operator,DEMATEL method

[1] Yang J,Huang H Z,He L P,et al.Risk Evaluation in Failure Mode and Effects Analysis of Aircraft Turbine Rotor Blades Using Dempster-Shafer Evidence Theory under Uncertainty [J].Engineering Failure Analysis,2011,18(8):2084-2092
[2] Vinodh S,Aravindraj S,Narayanan R S,et al.Fuzzy Assessment of FMEA for Rotary Switches:A Case Study [J].The TQM Journal,2012,24(5):461-475
[3] Kahraman C,Kaya L,?瘙塁envar .Healthcare Failure Mode and Effects Analysis under Fuzziness [J].Human and Ecological Risk Assessment,2013,9(2):538-552
[4] Liu H C,Liu L,Lin Q L.Fuzzy Failure Mode and Effects Analysis Using Fuzzy Evidential Reasoning and Belief Rule-Based Methodology [J].IEEE Transactions on Reliability,2013,2(1):23-36
[5] Zhou Q,Thai V V.Fuzzy and grey theories in failure mode and effect analysis for tanker equipment failure prediction[J].Safety Science,2016(83):74-79
[6] Lolli F,Ishizaka A,Gamberini R,et al.FlowSort-GDSS-A novel group multi-criteria decision support system for sorting problems with application to FMEA[J].Expert Systems with Applications,2015,42(17):6342-6349
[7] Emovon I,Norman R A,Alan J M,et al.An integrated multicriteria decision making methodology using compromise solution methods for prioritising risk of marine machinery systems[J].Ocean Engineering,2015,105(10):92-103
[8] Mandal S,Maiti J.Risk analysis using FMEA:Fuzzy similarityvalue and possibility theory based approach[J].Expert Systems with Applications,2014,41(7):3527-3537
[9] Rafie M,Namin F S.Prediction of subsidence risk by FMEA using artificial neural network and fuzzy inference system[J].International Journal of Mining Science & Technology,2015,25(4):655-663
[10] 马存宝,李雯,孙焱,等.基于模糊理论的FMEA方法研究[J].测控技术,2013,32(8):137-140
[11] 曹嘉容,王瑛,支乐.基于二元语义与灰色关联决策的改进FMEA方法[J].空军工程大学学报(自然科学版),2014(5):92-95
[12] Chang K H,Chang Y C,Wen T C,et al.An innovative approach integrating 2-tuple and LOWGA operators in process failure mode and effects analysis [J].International Journal of Innovative Computer Information & Control,2012,8(1):747-761
[13] Fuller R,Majlender P.An analytic approach for obtaining maximal entropy OWA op erator weights [J].Fuzzy Sets & Systems,2001,4(124):53-57

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!