面向流水线型模式的MANET嵌入式可靠性分析研究

计算机科学 ›› 2013, Vol. 40 ›› Issue (Z6): 374-376.

面向流水线型模式的MANET嵌入式可靠性分析研究

赵志峰,田立新,赵曦滨,钟诚

镇江船艇学院计算机教研室镇江212003;江苏大学控制科学与工程博士后流动站镇江212013;清华大学软件学院北京100084;镇江船艇学院计算机教研室镇江212003

出版日期:2018-11-16 发布日期:2018-11-16
基金资助:
本文受国家自然科学基金(61073168)资助

Embedded Reliability Modeling of Assembly-line Production Oriented MANET

ZHAO Zhi-feng,TIAN Li-xin,ZHAO Xi-bin and ZHONG Cheng

Online:2018-11-16 Published:2018-11-16

摘要/Abstract

摘要： 随着大型离散制造业的竞争日益激烈,提高生产效率变得越来越重要。实施MES(Manufacturing Execution System)是提高竞争力的一个比较好的解决方案,而网络通信畅通是实施MES的关键基础。针对大型离散制造业车间的行业特点和实际环境,引入了移动自组织网络(MANET,Mobile Ad hoc Network)作为通信的网络。由于MANET是不依赖固定基础设施、无中心控制、动态拓扑的动态无线通讯网络,研究基于实际环境的MANET的可靠性对于网络的部署和调整就显得非常有现实意义。基于实际制造业车间环境,给出了面向作业型制造业生产模式的MANAET可靠性分析模型(ERMWT,Embedded Reliability Model on Working Table)。

关键词: MANET,可靠性,制造业,嵌入式

Abstract: Since the market competition of manufacturing becomes intense,improving the productive efficient is of importance．Manufacturing Execution System(MES) is considered to be good solution,but the communication network is basic of MES．With the serious environment of the shop in manufacturing,MANET(mobile ad hoc network) is introduced into our scheme．MANET is a kind of dynamic wireless communication network that does not rely on a fixed infrastructure and is lack of any centralized control.Based on a deep analysis of the application and real work environment,this paper proposed a ERMWT(Embedded Reliability Model on Working Table)for a work table production oriented MANET．

Key words: MANET,Reliability,Production,Embedded

赵志峰,田立新,赵曦滨,钟诚. 面向流水线型模式的MANET嵌入式可靠性分析研究[J]. 计算机科学, 2013, 40(Z6): 374-376. https://doi.org/

ZHAO Zhi-feng,TIAN Li-xin,ZHAO Xi-bin and ZHONG Cheng. Embedded Reliability Modeling of Assembly-line Production Oriented MANET[J]. Computer Science, 2013, 40(Z6): 374-376. https://doi.org/

参考文献

[1] Bai F,Sadagopan N,Krishnamachari B,et al.Modelling PathDuration Distributions in MANETS and Their Impact on Reactive Routing Protocols[J].IEEE J．on Selected Areas in Communications,2004,22(7):1357-1373
[2] Colbourn C H．The combinatorics of network reliability[M]．New York:Oxford University Press,1987
[3] Fratta L,Montanari U G．A Boolean algebra method for computing terminal reliability in a communication network[J]．IEEE Trans Circuit Theory,1973,20(3):203-11
[4] Fratta L,Montanari U G．A recursive method based on case analysis for computing Network terminal reliability[J]．IEEE Trans Commun,1978,6(8)
[5] ElFotoh H A,Iyengar S S,Chakrabarty K．Computing reliability and message delay for cooperative wireless distributed sensor networks subject to random failures[J]．IEEE Transactions on Reliability,2005,54(1):145-155
[6] Cook J L,Ramirez-Marquez J E．Two-terminal reliability analyses for a mobile ad hoc wireless network[J]．Reliability Engineering & System Safety,2007,92(6):821-829
[7] Ramirez-Marqueza J E,Roccob C M．All-terminal network reliability optimization via probabilistic solution discovery[J]．Reliability Engineering and System Safety,2008,3:1689-1697
[8] Dimitar T,Sonja F,Bekim C,et al.Link reliability analysis in ad hoc networks[C]∥XII Telekomunikacioni forum TELFOR 2004．Beograd,Sava Centar,2004:23-25
[9] 赵志峰,赵曦滨,陈丹宁．多维MANET可靠性建模研究[J]．计算机科学,2011,38(5)
[10] You Zhi-yang,Zhao Xi-bin,Zhao Zhi-feng,et al.ReliabilityModeling of Assembly-line Production Oriented MANET[C]∥International Conference on Computer Application and System Modeling．2010
[11] Padmavathy N,Chaturvedi S K．Evaluation of mobile ad hocnetwork reliability using propagation-based link reliability mo-del[J]．Reliability Engineering and System Safety,2003,115:1-9
[12] Chen Bin-chao,Phillips A,Matis T I．Two-terminal reliability of a mobile ad hoc network under thea symptotic spatial distribution of the random waypoint model[J]．Reliability Engineering and System Safety,2012,106:72-79

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed