计算机科学 ›› 2018, Vol. 45 ›› Issue (6A): 54-57.

• 综述研究 • 上一篇    下一篇

指针式仪表自动读数识别技术的研究现状与发展

韩绍超,徐遵义,尹中川,王俊雪   

  1. 山东建筑大学计算机科学与技术学院 济南250101
  • 出版日期:2018-06-20 发布日期:2018-08-03
  • 作者简介:韩绍超(1991-),男,硕士生,主要研究方向为数字图像处理与模式识别、信号处理、仪器仪表识别,E-mail:1209988712@qq.com;徐遵义(1969-),男,博士,副教授,硕士生导师,CCF会员,主要研究方向为图像处理与模式识别、知识管理与数据挖掘,E-mail:562852034@qq.com(通信作者);尹中川(1992-),男,硕士生,主要研究方向为数据挖掘、故障检测、人工智能、离群点挖掘;王俊雪(1992-),女,硕士生,主要研究方向为数据挖掘、人工智能。
  • 基金资助:
    山东省重点研发计划(2015GGX101047,2016GGX101024)资助

Research Review and Development for Automatic Reading Recognition Technology of Pointer Instruments

HAN Shao-chao,XU Zun-yi,YIN Zhong-chuan,WANG Jun-xue   

  1. School of Computer Science and Technology,Shandong Jianzhu University,Jinan 250101,China
  • Online:2018-06-20 Published:2018-08-03

摘要: 指针式仪表自动判读技术是当前机器视觉研究的热点,也是模式识别领域一项重要的研究内容和前沿技术。在对指针式仪表识别技术进行了一般性概述之后,详细介绍了基于机器视觉的指针式仪表自动读数识别技术的基本概念、基本原理和主要研究内容,介绍了该技术在国内外的研究现状,同时重点介绍了图像校正、圆形表盘轮廓检测、指针线检测和角度计算等主要研究内容的最新进展,最后给出了指针式仪表自动读数识别涉及的关键技术和发展方向。

关键词: 读数识别, 霍夫变换, 机器视觉, 倾斜矫正, 图像细化, 指针式仪表

Abstract: The technology of determining the reading of pointer instruments automatically is a hotspot of machine vision in recent years,which is also an important research content and advanced technology in the field of pattern recognition.After the general overview of the recognition technology of the pointer meters,the basic concept,fundamental and main research contents of automatic reading recognition technology of the pointer meters based on machine vision were introduced in this paper.The research status of this technology both at home and abroad was introduced.The latest progress of the image correction,detection of round contours,detection of the pointer and angle calculation was introduced.Finally,the key technology and the development direction of the automatic reading recognition technology were pointed out .

Key words: Hough transformation, Image refinement, Machine vision, Pointer instruments, Reading recognition, Tilt correction

中图分类号: 

  • TP216+.1
[1]ZHENG C,WANG S,ZHANG Y,et al.A robust and automatic recognition system of analog instruments in power system by using computer vision.Measurement,2016,9(2):413-420.
[2]HAN J,LI E,TAO B,et al.Reading recognition method of analog measuring instruments based on improved hough transform[C]∥International Conference on Electronic Measurement & Instruments.IEEE,2011:337-340.
[3]YANG B,LIN G,ZHANG W.Auto-recognition Method for Poin-ter-type Meter Based on Binocular Vision.Journal of Computers,2014,9(4):787-793.
[4]李勇.指针式表盘的自动识别技术研究及实现[D].郑州:郑州大学,2015.
[5]王欣.智能变电站指针式仪表自动识别方法的研究[D].沈阳:沈阳工业大学,2016.
[6]黄颖怡,汪仁煌,岳利军.机器视觉仪表识别方法的研究进展[J].自动化仪表,2009,30(8):58-60.
[7]邹俊贵,陈以.常用指针式仪表识别技术研究综述[J].仪器仪表与分析监测,2009(1):1-3 [8]CHI J,LIU L,LIU J,et al.Machine Vision Based Automatic Detection Method of Indicating Values of a Pointer Gauge[J].Mathematical Problems in Engineering,2015,2015(3):1-19.
[9]LOWE D G,LOWE D G.Distinctive Image Features from Scale-Invariant Keypoints[J].International Journal of Computer Vision,2004,60(2):91-110.
[10]BAY H,TUYTELAARS T,GOOL L V.SURF:Speeded Up Robust Features [J].Computer Vision & Image Understan-ding,2006,110(3):404-417.
[11]CALONDER M,LEPETIT V,STRECHA C,et al.BRIEF:binary robust independent elementary features[C]∥European Conference on Computer Vision.Springer-Verlag,2010:778-792.
[12]RUBLEE E,RABAUD V,KONOLIGE K,et al.ORB:An efficient alternative to SIFT or SURF[C]∥IEEE International Conference on Computer Vision.IEEE,2011:2564-2571.
[13]陈小艳,王强,李柏林.改进的Hough变换检测圆方法[J].计算机系统应用,2015,24(8):197-201.
[14]朱桂英,张瑞林.基于Hough变换的圆检测方法[J].计算机工程与设计,2008,29(6):1462-1464.
[15]ALEGRIA F C,SERRA A C.Computer vision applied to the automatic calibration of measuring instruments[J].Measurement,2000,28(3):185-195.
[16]WANG Q,TANG X,DING C,et al.Automatic alignment system based on center point recognition of analog measuring instruments dial∥Conference of the IEEE Industrial Electroni-cs Society,IECON 2013.New York:IEEE,2013:5532-5536.
[17]LI B,JIA Z.Some Results On Condition Numbers Of The Scaled Total Least Squares Problem[J].Linear Algebra & Its Applications,2009,435(3):674-686.
[18]张远辉,张鼎,许昌,等.指针式仪表总体最小二乘图像校验算法[J].自动化仪表,2015,36(5):75-79.
[19]BRESENHAM J.A linear algorithm for incremental digital display of circular arcs[J].Communications of the Acm,1977,20(2):100-106.
[20]BELAN P A,ARAUJO S A,LIBRANTZ A F H.Segmentation-free approaches of computer vision for automatic calibration of digital and analog instruments[J].Measurement,2013,46(1):177-184.
[21]LIU J,LIU Y,YU L.Novel method of Automatic Recognition for Analog Measuring Instruments∥International Conference on Manufacturing Science and Engineering.2015:67-74.
[22]YANG Z,NIU W,PENG X,et al.An image-based intelligent system for pointer instrument reading[C]∥IEEE International Conference on Information Science and Technology.IEEE,2014:780-783.
[23]YUE X F,MIN Z,ZHOU X D,et al.The Research on Auto-recognition Method for Analogy Measuring Instruments[C]∥International Conference on Computer,mechatronics,Control and Electronic Engineering.2010:207- 210.
[24]GONZALEZ R C,WOODS R E.数字图像处理(第三版)[M].阮秋琦,阮宇智,译.北京:电子工业出版社,2011.
[25]SABLATNIG R,KROPATSCH W G.Automatic reading of analog display instruments∥Iapr International Conference on Pattern Recognition.New York:IEEE,1994:794-797.
[26]ALEGRIA E C,SERRA A C.Automatic calibration of analog and digital measuring instruments using computer vision[J].IEEE Transactions on Instrumentation & Measurement,2000,49(1):94-99.
[27]HEMMING B,LEHTO H.Calculation of uncertainty of measurement in machine vision case:a system for the calibration of dial indicators∥Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference.Budapest,Hungary:IEEE,2001:665-670.
[28]HEMMING B,FAGERLUND A,LASSILA A.High-accuracy automatic machine vision based calibration of micrometers[J].Measurement Science & Technology,2007,18(18):1655-1660.
[29]DATTA A,KIM J S,KANADE T.Accurate camera calibration using iterative refinement of control points[C]∥IEEE,International Conference on Computer Vision Workshops.IEEE,2009:1201-1208.
[30]TSAI C Y,TSAO A H,WANG C W.Real-Time Feature Descriptor Matching via a Multi-Resolution Exhaustive Search Method.Journal of Software,2013,8(9):2197-2201.
[31]HOUGH P V C.Method and means for recognizing complex patterns:U.S.Patent 3069654[P].1962.
[32]陶冰洁,韩佳乐,李恩.一种实用的指针式仪表读数识别方法[J].光电工程,2011,38(4):145-150.
[33]颜友福,刘金清,吴庆祥.基于区域生长的指针式仪表自动识别方法[J].计算机系统应用,2015,24(4):164-170.
[34]李祖贺,刘嘉,薛冰,等.面向自动校验系统的指针式压力表读数识别[J].计算机工程与应用,2016,52(23):213-219.
[35]张春雪.图像的边缘检测方法研究.江苏:江南大学,2011.
[1] 王栋, 周大可, 黄有达, 杨欣.
基于多尺度多粒度特征的行人重识别
Multi-scale Multi-granularity Feature for Pedestrian Re-identification
计算机科学, 2021, 48(7): 238-244. https://doi.org/10.11896/jsjkx.200600043
[2] 韩克堃, 胡桂川, 任静, 何鸿宇, 刘佳音.
图像处理在风电叶片法兰端面特征尺寸检测中的应用
Application of Image Processing in Feature Size Detection of Wind Turbine Blade’s Flange Face
计算机科学, 2019, 46(6A): 562-565.
[3] 李堃, 黎向锋.
基于日间行车的灯语识别技术
Lamp Language Recognition Technology Based on Daytime Driving
计算机科学, 2019, 46(11A): 277-282.
[4] 方正, , 曹铁勇, 付铁连.
基于Bottom-hat频谱方法的运动模糊参数估计方法
Motion Blur Parameters Estimation Based on Bottom-hat Using Spectrum
计算机科学, 2018, 45(8): 36-40. https://doi.org/10.11896/j.issn.1002-137X.2018.08.007
[5] 张文勇, 陈乐柱.
基于LabVIEW机器视觉的餐具分拣系统
Tableware Sorting System Based on LabVIEW Machine Vision
计算机科学, 2018, 45(6A): 595-597.
[6] 钱基德, 陈斌, 钱基业, 赵恒军, 陈刚.
基于机器视觉的液晶屏Mura缺陷检测方法
Machine Vision Based Inspection Method of Mura Defect for LCD
计算机科学, 2018, 45(6): 296-300. https://doi.org/10.11896/j.issn.1002-137X.2018.06.052
[7] 邹娜, 田金文.
多特征融合红外舰船尾流检测方法研究
Research on Multi Feature Fusion Infrared Ship Wake Detection
计算机科学, 2018, 45(11A): 172-175.
[8] 朱航江,朱帆,潘振福,朱永利.
运动状态与尺度估计的核相关目标跟踪方法
Visual Object Tracking Method with Motion Estimation and Scale Estimation
计算机科学, 2017, 44(Z11): 193-198. https://doi.org/10.11896/j.issn.1002-137X.2017.11A.040
[9] 安世全,白羚,瞿中.
基于直线段特征单元提取的隧道砼衬砌接缝去除算法
Lining Seam Elimination Algorithm in Tunnel Concrete Lining Based on Line Feature Unit Extraction
计算机科学, 2017, 44(7): 304-308. https://doi.org/10.11896/j.issn.1002-137X.2017.07.055
[10] 宣寒宇,刘宏哲,袁家政,李青,牛小宁.
一种鲁棒性的多车道线检测算法
Robust Multi-lane Detection Algorithm
计算机科学, 2017, 44(11): 305-313. https://doi.org/10.11896/j.issn.1002-137X.2017.11.047
[11] 徐邦振,汤一平,蔡国宁.
基于机器视觉的轻量级驾驶辅助系统
Machine Vision-based Lightweight Driver Assistance System
计算机科学, 2015, 42(Z11): 520-524.
[12] 徐振驰,纪磊,刘晓荣,周晓佳.
基于显著性特征的食用菌中杂质检测
Recognition of Impurities Based on their Distinguishing Feature in Mushrooms
计算机科学, 2015, 42(Z11): 203-205.
[13] 郭庆慧,梁秀霞,张锐.
基于稀疏特征点的单视点深度图像校准
Calibration for Single Viewpoint Depth Image Based on Sparse Feature Points
计算机科学, 2014, 41(Z6): 191-195.
[14] 寇光杰,马云艳,岳峻,邹海林.
膜计算在图像处理中应用的研究进展及展望
Research Advance and Prospect of Membrane Computing Applied in Image Processing
计算机科学, 2014, 41(Z11): 139-143.
[15] 汤一平,黄磊磊,严杭晨,马宝庆.
轻量级的全息道路交通状态视觉检测的研究
Research on Traffic Holographic State Detection Based on Machine Vision in Lightweight
计算机科学, 2014, 41(5): 308-314. https://doi.org/10.11896/j.issn.1002-137X.2014.05.066
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!